How to ensure the normal operation of the planetary mixer

Maintenance work is indispensable for both people and machines. For example, our planetary mixer has special work content, strong workload, fast running frequency, and accumulation of dust. Use and maintenance bring various inconveniences, thereby reducing the performance of the equipment and shortening its service life.
Therefore, in order to extend the service life of the dispersing planetary mixer, we should regularly clean and maintain it from the aspects of internal structure, manufacturing principle and external use, so as to improve the efficiency of the equipment and increase economic benefits.
1. Operation and operation
Many times we do not realize the importance of checking the mixer before use and operating the equipment correctly. We simply think that necessary maintenance and repairs in time can extend the service life of the equipment. In fact, this is not the case. Proper use of equipment can not only provide excellent performance, but also make the equipment economical and durable.
The mixture that needs to be stirred should strictly refer to the specified value and do not exceed it at will; the transmission device, mixing device and other internal parts should be filled with sufficient lubricating oil according to the regulations; before use, check whether the vibrating parts and the connecting parts are tight, and whether the grounding wire and each circuit are tight. , whether the water supply device, etc. is normal;
Check whether the mixing blades are loose or abnormally worn; whether idling can be performed normally; whether the noise of motors, reducers and other equipment is abnormal;
During the use of the mixer, the feeding sequence should be reasonable and scientific to promote the homogeneity of the mix; the operating environment should be kept clean; water supply should be timely when unloading; if the operation is correct, the machine should be stopped immediately if any abnormality is found.
2. Cleaning after use
After the equipment is finished working, the inside and outside of the machine should be carefully cleaned, especially in environments with heavy dust during operation. Before shutting down, add a certain proportion of water and stone and stir repeatedly to clean up the internal residue. Carefully wash away the attachments on the outside of the machine body and the accumulation around the discharge door.
3. Regular maintenance
(1) In order to avoid clogging of the additive feeding pipeline, it needs to be cleaned regularly.
(2) Wear parts should be inspected regularly and replaced in time.
(3) To ensure the normal operation of the hydraulic pump station, replace the hydraulic oil regularly.
(4) Regularly dismantle and inspect the mixing parts, check the degree of wear and tear, and replace parts that affect the safe use of the equipment.
(5) Check and correct the braking clearance, the activation and tightness of the upper hopper and discharge door.
(6) Check the flexibility of the mixing blades and transmission device.
(7) Check the water system and circuit conditions.
If you want the machine to be more durable and as new as ever, you must not only pay attention to daily maintenance, but also correct operation, so that the good performance of the machine can be exerted. Of course, we must clean the equipment in time after each use. Don't wait until If it is blocked again, it will affect the performance of the equipment and will be detrimental to the operation of the machine in the long run. In short, be careful!