What is the process of cleaning and changing the color of the horizontal sand mill?

How to clean the horizontal sand mill after use, or change the color when it needs to be cleaned? How can you clean it without affecting other colors? I'm afraid it's too troublesome to clean, so I want to find a simple and practical method. Many customers have such problems, so we have compiled some methods for you, let us see.
The general cleaning process is as follows:
1. Prepare the resin
Take the resin according to the recipe requirements, and take the resin quantitatively in a clean premix tank.
2. Varnish cycle (or one pass)
3. Connect the varnish tank to the sand mill, start the feed pump, and form a varnish cycle of varnish tank-feed pump-cylinder-varnish tank or a pass of varnish tank-feed pump-cylinder-abrasive tank.
4. Solvent circulation
1. According to the requirements of the formula, prepare the corresponding solvent type and quantity in a clean oily general-purpose barrel;
2. When there is 0.5-1 liter of varnish in the varnish tank, add 1/2 of the prepared solvent to the prepared one to establish a solvent cycle. During the solvent cycle, periodically jog the turntable;
3. Use filter paper to take out the solvent at the outlet every 1 minute, A: When the two adjacent colors are the same, import the solvent into the abrasive tank or the waste solvent bucket (depending on the requirements determined by PWS); B: Compared with the standard color plate , if the color is the same as or lighter than the standard color palette, it can be converted to 5;
4. When there is still about 0.5 liters of solvent in the tank, add another 1/2 solvent into the tank;
5. When there is almost no solvent in the tank, "shutdown" shutdown steps according to the operating procedures.
The above is the description of the cleaning process of the horizontal sand mill. After reading it, everyone knows how to clean it. I hope it will be helpful to everyone.