Why is the power of the high-speed dispersion machine weakened

The reasons for the power attenuation of the high-speed dispersion machine are generally as follows:

1. Belt looseness: first consider whether the belt is loose, because the belt will cause natural wear after being used for a long time, and the looseness of the belt will weaken the power transmission. After the transmission power is weakened, the actual operation will be affected. The power transmission of the belt has a great relationship with the quality of the belt. If it is found that the belt is loose, we recommend to replace the belt directly. Generally, the power can be restored after the replacement.

2. Motor failure: Motor failure can directly lead to the weakening of power. The motor is the power source of the high-speed dispersion machine. If the motor fails, then the motor failure needs to be checked and repaired. We recommend professionals to repair the motor, because the repair of the motor is relatively professional, and the average person is prone to operating errors during the repair. If the motor has an irreversible failure, it is recommended to replace the motor directly.

3. Insufficient voltage: When the voltage is insufficient, the power of the motor will be weakened, but this problem does not occur under normal circumstances. We suggest to test the voltage to see if it can reach the operating voltage of the high-speed dispersion machine.

4. Mechanical wear: The machine is naturally worn during use. If the life of the machine is reached, we recommend that you replace the equipment.

5. Wrong operation: There is a systematic method for the operation of the high-speed dispersing machine. If it is a wrong operation, it may cause the power to be weakened. For example, the dispersed solids are larger, and the dispersed items are more likely. The dispersing disc collides with the material cylinder and so on, so you must systematically learn the operation method before operation.

www.mixerbeadmill.com