How often does the mixer need lubrication?

1. Reducer maintenance: Replace the new oil after the first cumulative use of 100 hours, and then replace it every six months.
2. Gear grease: It is recommended to maintain it every three months.
3. Rolling bearings: It is generally recommended to add grease every 2000-3000 hours, and it should also be added when there is abnormal noise.
4. Motor bearings: The rolling bearing motor should replace the grease after running for 2500-3000 hours, and the grease should be added every 1000 hours or so.
5. General motors: After running for about 5000 hours, the grease should be supplemented or replaced.
6. Coupling: Cross slider coupling, the replacement cycle is 1000 hours.
7. Ball screw: Replace the grease on the ball screw every six months.