Jun 18, 2025
Daily maintenance
1. Cleaning work: Regular cleaning of the sand mill is the basis of maintenance. When cleaning, a soft cloth or vacuum cleaner should be used, and hard objects or chemical solvents should be avoided to avoid scratching or corroding the surface of the equipment. During the cleaning process, special attention should be paid to cleaning the dust and debris inside the equipment to ensure the normal operation of the equipment.
2. Check the lubrication system: The lubrication system is the key to the normal operation of the sand mill. The oil level and quality of the lubricating oil should be checked regularly to ensure that the lubricating oil is sufficient and clean. If the lubricating oil is found to be deteriorated or contains impurities, it should be replaced in time. At the same time, it is also necessary to check whether the lubrication pipeline is unobstructed to ensure that the lubricating oil can be supplied to each lubrication point normally.
3. Check the fasteners: During the operation of the sand mill, the fasteners may loosen or fall off due to vibration and impact. Therefore, the fasteners of the equipment, such as bolts, nuts, etc., should be checked regularly to ensure that they are fastened reliably. If there is any loosening or falling off, it should be tightened or replaced in time.
4. Check the electrical system: The electrical system is the control center of the sand mill. The electrical circuit connection should be checked regularly to see if it is firm and the electrical components are intact to ensure the normal operation of the electrical system. At the same time, the grounding of the equipment should also be checked to ensure the safe operation of the equipment.
Regular maintenance
1. Replace wear parts: During the operation of the sand mill, some vulnerable parts such as grinding media and seals will gradually wear out. When these wear parts reach a certain degree of wear, they should be replaced in time to ensure the normal operation of the equipment. When replacing wear parts, spare parts of the same model and specification as the original parts should be selected to ensure the performance and stability of the equipment.
2. Check the transmission system: The transmission system is an important part of the sand mill. The operating status of the transmission system should be checked regularly, such as whether the bearings, gears, etc. are operating normally, and whether there are abnormal sounds or vibrations. If there are any abnormal conditions, the machine should be stopped for inspection in time, and appropriate measures should be taken for repair or replacement.
3. Check the cooling system: The cooling system is crucial to ensure the normal operation of the sand mill. The operating status of the cooling system should be checked regularly, such as whether the cooling water is sufficient and whether the cooling pipeline is unobstructed. If there are any abnormal conditions, they should be handled in time to ensure the normal operation of the equipment.
4. Whole machine debugging: During the regular maintenance process, the sand mill should also be debugged. The debugging should be carried out in accordance with the equipment's operating procedures to ensure that the various parameters of the equipment meet the requirements. If there are any non-compliance conditions, they should be adjusted in time to ensure the normal operation of the equipment and product quality.
Precautions
1. Strictly abide by the operating procedures: When maintaining and servicing the sand mill, the equipment's operating procedures and safety specifications should be strictly followed. During the operation of the equipment, it is prohibited to disassemble or adjust the equipment to avoid damage to the equipment or safety accidents.
2. Choose suitable spare parts: When replacing the wear parts of the sand mill, spare parts of the same model and specification as the original parts should be selected. If inappropriate spare parts are used, it may cause equipment performance degradation or failure.
3. Regular maintenance and servicing: Regular maintenance and servicing of the sand mill is the key to ensuring the continuous and stable operation of the equipment. According to the use of the equipment and the requirements of the maintenance manual, a suitable maintenance and servicing plan should be formulated and strictly implemented according to the plan.
4. Deal with abnormal situations in time: During the operation of the sand mill, if there is an abnormal situation, the machine should be stopped for inspection and appropriate measures should be taken to deal with it. Do not continue to operate the equipment under abnormal conditions to avoid causing greater damage to the equipment or safety accidents.
