Precautions when using planetary mixer

1. First, connect the electricity. Make sure the ground wire of the planetary mixer is connected properly to avoid accidents.
2. During inching debugging, when looking from top to bottom, the planetary carrier of the planetary mixer rotates in a clockwise direction. If it rotates in the opposite direction, then it is a power connection error and the power supply should be reconnected.
3. When the planetary mixer barrel is loaded and pushed into the machine base, the barrel must first be fixed. Only after the planetary carrier and the barrel are sealed, can the equipment be operated to prevent the rotation of the planetary carrier from injuring the operator.
4. If the material needs vacuum degassing, first check whether the planetary mixer water tank is filled with water, then turn on the vacuum pump and check the sealing performance of the vacuum pipeline to prevent air leakage. When turning off the vacuum, first close the ball valve in front of the vacuum pump. When raising the planet cover, you must first open the vent and relieve the pressure before raising it.
5. When using the hydraulic station of the planetary mixer, pay attention to the pressure indication and do not open it too much. When the pressure pointer shakes, it indicates that the pressure is overpressured and needs to be relieved.
6. After using the planetary mixer, when cleaning the barrel, all power must be cut off before cleaning to prevent electric shock.
7. When producing materials, it is strictly forbidden to put your hands into the barrel to prevent danger.
8. If there is any abnormal sound during the operation of the planetary mixer, it must be stopped immediately for inspection. The operation can only be restarted after the fault is eliminated.
The use of planetary mixers has brought great convenience to many companies. It has been widely used in medicine, cosmetics, chemicals, food and other industries because of its superior characteristics. In order to reduce the failure of the planetary mixer and improve its performance, it is necessary to operate according to the standardized procedures. If you are unsure or unclear, you must consult professionals to avoid accidents and ensure the safety of the equipment and operators.